Differences between revisions 2 and 5 (spanning 3 versions)

Block 12 - Install new PCK/TPC

Description

New planetary constants, or an update RA and DEC of Bennu pole, rotation rate, etc.

Capture state of system by running RESIDUALS and make a copy somewhere for comparison
Update INIT_LITHOS.TXT and make_sumfiles.txt with new PCK/TPC
Run MAKE_SUMFILES Option 1 to update the NOMINALS
Capture state of system by running RESIDUALS again... did the s/c move the amount you would expect?
Make sure the sigmas in NOMINALS are small so that the next step brings the SUMFILES close to the NOMINALS
Run DYNAMICS to set the sigmas to their proper value
Update INIT_LITHOS.TXT to turn off overlaps and limbs on the LMK solution (stereo only) WB=1 WO=0 WL=0 WR=0.
PIC_WEIGHT = 1 0 1 1 0
GEOMETRY 210-3-n-n
Reset INIT_LITHOS.TXT initial values
GEOMETRY 210-3-n-n
Run GEOMETRY 20-15-n-n again
Iterate

(Compiled by JW)

-  ⇤ ← Revision 2 as of 2018-04-25 10:06:16 → 
  Size: 826
  Editor: JohnWeirich
  Comment:
+   ← Revision 5 as of 2019-08-13 10:00:49 → ⇥
  Size: 976
  Editor: JohnWeirich
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 16:
- * Make sure the sigmas in NOMINALS are small so that the next step brings the SUMFILES close to the NOMIALS (if the s/c didn't move much in the previous step you can probably skip this step and the next)
 * GEOMETRY 20-15-n-n
+ * Make sure the sigmas in NOMINALS are small so that the next step brings the SUMFILES close to the NOMINALS
-Line 19:
+Line 18:
+ * Update INIT_LITHOS.TXT to turn off overlaps and limbs on the LMK solution (stereo only) WB=1 WO=0 WL=0 WR=0.
 * PIC_WEIGHT = 1 0 1 1 0
 * GEOMETRY 210-3-n-n
 * Reset INIT_LITHOS.TXT initial values
 * GEOMETRY 210-3-n-n
-Line 21:
+Line 26:
+----------

''(Compiled by JW)''