== DN2TEMP.TXT ==

||Category B||Version 3.0.1||

This the parameters to convert DN values (level 0 images) into temperatures and the weighting to apply to the final solution.  


=== Coefficients ===
 * Cameras 1, 2, 3 do not use the coefficients.
 * Cameras 4 and 5 (TAGCAMs) use only the first two. 
 * Coefficients 3 and 4 are never used.

The camera's thermoresister is calculated as
 T_i = DN * C1^3^ + DN * C2^2^ + DN * C3 + C4



=== Weighting ===

There are four thermoresisters on each camera.  The weights 1-4 provide how much impact each thermoresistor should have.  While this example has it totaling 1.0, SPC normalizes the weighting, so it isn't needed.

 * N = W1 + W2 + W3 + W4

 * T_final = T1 * W1/N + T2 * W2/N + T3 * W3/N + T4 * W4/N
 
=== Columns ===


|| Camera Number || Coef 1 || Coef 2 || Coef 3 || Coef 4 || Weight 1 || Weight 2 || Weight 3 || Weight 4 ||
|| ||C1 || C 2 || C 3 || C 4 || W 1 || W 2 || W 3 || W 4 ||

{{{
1     0.80168E+02   -0.69285E-01    0.23237E-04   -0.37331E-08  0.25  0.25  0.25  0.25
2     0.80168E+02   -0.69285E-01    0.23237E-04   -0.37331E-08  0.25  0.25  0.25  0.25
3     0.80168E+02   -0.69285E-01    0.23237E-04   -0.37331E-08  0.25  0.25  0.25  0.25
4    -263.15    0.15259  0  0  1.D0  0.D0  0.D0  0.D0
5    -263.15    0.15259  0  0  1.D0  0.D0  0.D0  0.D0

C    NAV & NFT CAMERA HEAD TEMPERATURE PARAMETERS FROM
C    UA-SIS-9.4.4-322_OSIRIS-REx-NavCam-Data-Product-SIS_Rev_2.0_CCv0005.pdf
C
C    OCAMS CAMERA HEAD TEMPERATURE PARAMETERS CALCULATED FROM
C    OREX-DOC-05.01-00259_OCAMS Flight SW Engineering Dictionary_Rev_C_CCv0018.pdf
C    Fit to DN 1200 - 3400 (TC from ~ 25 to -35) has RMS = 0.18C, MAXDEV = 0.30C 

C    Focal length temperatures for OCAMS are linear combinations of housekeeping temperatures:
C      TMC =  F1*MCFWHTMP+F2*MCFWMTMP+F3*MCLENTMP+F4*MCROETMP
C      TSC =  F1*SCFWHTMP+F2*SCFWMTMP+F3*SCLENTMP+F4*SCROETMP
C      TPC =  F1*PCFOHTMP+F2*PCFOMTMP+F3*PCMR1TMP+F4*PCROETMP
C
}}}