Eliminate pictures from landmark

FILL IN THE ??? BELOW!

Entering "e" at the Main Menu will allow you to removed pictures from a landmark. The landmark must first be loaded (i.e. use the "i" option). Note that the effect is immediate; you cannot undo, and there is no need to save afterwards!

Example Display

Main Menu: Q 0123O IUCRSG NVAMBX DEPL FZH? e
 >e                                                                               

   #     PICNM          EMISS      COV       ILL       RES       #LMK      PHASE      INV  +/-

   1   P3T11L2H0201     47.57      0.88      0.88      0.25        96        51         0 *
   2   P3T11L2H0202     47.57      0.88      0.88      0.25        96        52         0 *
   3   P3T11L2H0203     50.91      0.88      0.88      0.26        94        30         0 *
   4   P3T11L2H0204     50.91      0.88      0.88      0.26        96        68         0 *
   5   P3T11L2H0206     51.04      0.95      0.95      0.26        97        75         0 *
   6   P3T11L2H0207     47.92      1.00      1.00      0.25        95        30         0 *
   7   P3T11L2H0208     47.92      1.00      1.00      0.25        97        68         0 *
   8   P3T11L2H0209     43.08      0.93      0.93      0.24        96        52         0 *
   9   P3T11L2H0210     43.08      0.93      0.93      0.24        97        52         0 *
  10   P3T11L2H0211     39.22      0.85      0.85      0.23        96        68         0 *
  11   P3T11L2H0212     39.22      0.85      0.85      0.23        94        30         0 *
  12   P3T11L2H0213     39.02      0.95      0.95      0.23        96        74         0 *
  13   P3T11L2H0215     42.66      1.00      1.00      0.24        96        68         0 *
  14   P3T11L2H0216     42.66      1.00      1.00      0.24        93        30         0 *

  3.05061409811740111E-002  7.31441252330175540E-003

 c. Continue
 a. Auto remove
 m. Manual remove
 n. Auto remove (new pictures)
 o. Remove low-correlation pix
 p. Prune landmark
 v. Check peripheral visibility
 t. Auto change topo flags
 l. Change low-correlation topo flags
 q. Quit

Example Table Breakdown

#: Temporary image number.

PICNM: Picture name.

EMISS: Emission angle; This angle is determined by the current topography.

COV: Coverage; This is the fraction of the landmark covered by the image.

ILL: Illumination; This is the fraction of the landmark that is not in shadow.

RES: Resolution; This is indicating a relative measure that is a function of the image resolution and the GSD (it's not the ratio; but it is close to that value). It is calculated by ???

#LMK: Number of landmarks added to that picture.

PHASE: Phase angle of the image.

INV +/-: ???

Example Options Breakdown

c. Continue: Same as entering "q".

a. Auto remove: Will display the following grid, then ask for auto remove parameters. Each entry on the grid shows the number of images that are found in that bin.

Rows: This the emission angle, and is based upon the current topography. So if the topography is poor you may eliminate pictures you want to keep and/or keep pictures you want to eliminate.
Columns: ??? Something to do with image resolution and GSD, but I am not sure.

     1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
  0  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
  2  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
  4  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
  6  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
  8  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 10  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 12  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 14  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 16  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 18  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 20  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 22  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 24  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 26  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 28  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 30  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 32  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 34  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 36  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 38  .  .  3  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 40  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 42  .  .  4  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 44  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 46  .  .  4  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 48  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 50  .  .  3  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 52  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 54  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 56  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 58  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 60  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 62  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 64  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 66  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 68  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 70  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 72  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 74  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 76  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 78  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 80  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 82  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 84  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 86  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 88  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
 90  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

 Input INVLIM, SLIM, CLIM, ILIM, RSMN, RSMX

INVLIM: Value that represents the maximum fraction of points in the image that can be "invisible". "Invisible" means the pixel cannot be seen because it is blocked, such as the bottom of a crater in an oblique view. The number entered is thousandths of a fraction, so 27 would be 2.7%. Typically this value is just set to 0.
SLIM: Maximum emission angle that is allowed.
CLIM: Coverage limit. Minimum fraction of maplet overlapped by image.
ILIM: Illumination limit. Minimum fraction of maplet covered by illuminated image.
RSMN: Minimum allowed ratio of image resolution (km/px) to maplet scale.
RSMX: Maximum allowed ratio of image resolution (km/px) to maplet scale.

m. Manual remove:

n. Auto remove (new pictures):

o. Remove low-correlation pix:

p. Prune landmark:

v. Check peripheral visibility:

t. Auto change topo flags:

l. Change low-correlation topo flags:

Choose style		book: Create a structured PDF document with headings, chapters, etc. webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output. continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title		Title of the document for the front page.
Heading 1 as title		Extract the first heading of the document and use it as title. If checked the title field has no effect.
Title file/image		The title image or HTML page. These file has to be an attachments!
Version		Specify document version to be displayed on the title page.
Author		Intellectual property owner of this document.
Copyright		Copyright notice for this document.
Apply page information		Information about who and when modified the document are applied at the end.

Output format		Specifies the output format.
Output options	Grayscale document Title page Compression : JPEG big images

Body color		Enter the HTML color for the body (background).
Body image		Enter the image file for the body (background). These file has to be an attachments!
Text color		Enter the HTML color for the text.
HTTP links color		Sets the color of links.
Style of HTTP links
Create HTTP links		Enables generation of links in PDF files.

Base font size		Set the default size of text.
Line spacing		Set the spacing between lines of text.
Body typeface		Choose the default typeface (font) of text.
Heading typeface		Choose the default typeface (font) of headings.
Header/Footer size		Set the size of header and footer text.
Header/Footer font		Choose the font for header and footer text.
Charset set		Change the encoding of the text in document.
Embed fonts		Check to embed font in the output file.

Page mode		Controls the initial viewing mode for the document. Document: Displays only the docuemnt pages. Outline: Display the table-of-contents outline as well as the document pages. Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Page layout		Controls the initial layout of document pages on the screen. Single: Displays a single page at a time. One column: Displays a single column of pages at a time. Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
First page		Choose the initial page that will be shown.

Input

Output

Page

Contents

Colors

Fonts

PDF

Security

Expert

About

Example Display

Example Table Breakdown

Example Options Breakdown

Encryption		Check to number all of the headings in the document.
Permissions	Print Modify Copy Annotate	Specifies the document permissions.
User password		Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Owner password		Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Language translation		Specify language to use for date and time format.
Dynamic code block		Shrink code blocks on page.
Lines in code block		Show line numbers for code blocks.
Use dots instead of spaces in code blocks		Make spaces visable by dots (·) instead of white spaces.
Use a para character for line breaks		Make line breaks visable by a extra character (¶) at the end.
Enable debugging information		Enable this feature if you searching for problems or intent to report a bug report