Iterate
Loop as required. Do nftBlockFinish when done with iterations.
Log the following. localLoop.sh will handle this
- sigma after each iteration
- nofit "no correlation" flags
- Stop on a real flag and email
- Number of nofits
- corrEval results
Batch Run
Check the following
- Daemon is running
- Terminate is unset (if you want more than one)
localLoop.sh is set (map=<ID><Res>)
- interationCount is a useful number. Whatever number is set in "iterationCount" when monitor is start will be increment and used as the $id variable in localLoop.sh. Thus, it is useful to set it to something new if you are doing a different suite of iterations.
For the first 2 full iterations (i.e. over ALL maplets), make sure there are no images with a correlation <0.1 before starting a full iteration. If there are images that are getting a correlation <0.1 even after several iterations, delete if emission angle is >50, illumination coverage (after x-0.025) < 0.5, or phase less than 8 or 9. They are weak images and will not contribute much anyway.
After you have done 2 full iterations, clean according to the criteria for a correlation <0.1, but apply it to correlations <0.3. Again, if after many iterations they still are <0.3, they are not strong anyway.
The final check for an MLN is to use bigEval.sh <Feature Name>A
If the resulting bigmap has SigmaScore >2, you are done. Make sure you've run at least 2 full iterations (all maplets) to make sure everything has stabilized.
- More iterations may help (stop if the avg sigmaScore is going down) or you may need more images, a fill, or some other technique.
Note: Consider changing USRMX to something other than 12. If there are < 24 landmarks, then using N as user max will be faster. While each process takes longer to run, it is faster than doing two maplets in succession.
ROI Iterate
ID=RDL09 Res=5 bigmap < nftConfig/nftBigmap-$ID-$Res.in
Be sure you have made the bigmap before pasting below
echo map=$ID$Res > config/nftID
echo "Getting read for iteration $ID-$Res" >> notes
date >> notes
echo $ID$Res | tee -a notes
echo ${ID}$Res > tmpRun
cat nftConfig/nftBigmap-${ID}-$Res.in >> tmpRun
cat tmpRun >> notes
bigMapRef < tmpRun
tail -2 SIGMAS.TXT | head -1 | tee -a notes
echo y | cp -v USED_MAPS.TXT LIST.TXT
duplicates
relink.sh scripts/Piterate1St.seed make_scriptP.seed | tee -a notes
ls -l make_scriptP.seed >> notes
MAKE_LMRKLISTX
make_scriptP | tee run.sh
echo "Running iteration at " `date` >> notes
sh run.sh
monitorbigMapRef < tmpRun echo "Post run Sigma" >> notes tail -2 SIGMAS.TXT | head -1 | tee -a notes
nftBlockFinish $ID