== Autoregister ==
[[autoregister]] adds landmarks to one image at a time.  Contrast that with [[lithos]] that adds images to landmarks.  
 * Once you have a model, you will use [[autoregister]] to add images to the shape model.  You will do this every time new images are collected.
 * [[autoregister]] does not update the topography itself.  You still need to do an iteration to use the new images to build a template and generate topography.
 * When you accept the auto-alignment, SPC will update the spacecraft position and pointing.  This is the same as running [[geometry]], option 2.
 * Look at the LMRK_DISPLAY1.pgm.  How do the image/shape pair look.  Any issues?  If so, you may have to fix them.

Autoregister the new MapCam images of the north pole.
Do the following images (you registered these yesterday)
{{{
M595949305F0
M595949731F0
M595950157F0
M595950583F0
M595951436F0
M595952715F0
M595953568F0
M595953994F0
M595956978F0
M595957405F0
M595959536F0
M595960815F0
}}}

Basic autoregister cookbook:
 * autoregister
 * <imageName>
 * y - add images
 * 0.5 
 * n 

 * n - eliminate new
 * 0,50,.25,0,5 - criteria (notice there is one fewer parameter)

 * 1 - auto align
 * 2 - spacing
 * n - no new spacing
 * 0 - continue
 * y - accept changes (this will update the spacecraft pointing and position)

 * 1 - auto align
 * 1 - spacing
 * n - no new spacing
 * 0 - continue
 * y - accept changes (this will update the spacecraft pointing and position)

 * o - eliminate by correlation
 * .5 - Correlation value

 * 1 - auto align
 * 1 - spacing
 * n - no new spacing
 * 0 - continue
 * y - accept changes (this will update the spacecraft pointing and position and only use the remaining correlated images)

 * 4 - change flags
 * b - use all (this sets each image to be used when building a template)
 * 0 - end
 * q
END