= Test11N: =
Building topography with Sun position at 30, 0, -30, S/C Az every 45, S/C zenith 45

= Results Summary: =
CompareOBJ with translate is probably meaningless. CompareOBJ without translate is better, but is still quite different from compMapVec (10cm vs 1cm). Once I started auto aligning the top of the boulder dropped down.

= RMS Values: =

||STEP||COMPAREOBJ(km)(w/ trans)|| CompareOBJ (km) w/o trans || compMapVec(m)||NOTES||
||step01 ||         1.73||     ND     ||                 0.32861328 ||     align by hand||
||step02      ||    2.79  || 29.1   || 0.30130005||||
||step03        ||  3.62  ||  27.2 ||   0.27734375||||
||step05   ||       4.89  ||  24.1 ||   0.24008179||||
||step10    ||      5.21  ||  19.7 ||   0.18780518||||
||step15       ||   4.44 ||   17.5 ||  0.15457153 ||     start autoalign at 16||
||step20       ||   3.89  ||  15.2||   0.11227417||||
||step30       ||   3.03  || 14.3  ||  8.87756348E-02||||
||step40      ||    2.21  ||  13.9  || 7.58361816E-02||||
||step50        ||   1.72  ||   13.3 ||  6.17370605E-02||||
||step100        || 0.96   || 13.4  ||   3.65600586E-02||||
||step150  ||       1.33 ||  12.8  || 3.23486328E-03 || CompMapVec dropped 10x||
||step200   ||      1.74   || 12.4  || 1.46179199E-02|| CompMapVec increased||

= Traces: =
{{attachment:out1_final.png}}

= Landmark Display: =
step01 {{attachment:display01.jpg}} step200 {{attachment:display200.jpg}}