Test11N:
Building topography with Sun position at 30, 0, -30, S/C Az every 45, S/C zenith 45
Results Summary:
CompareOBJ with translate is probably meaningless. CompareOBJ without translate is better, but is still quite different from compMapVec (10cm vs 1cm). Once I started auto aligning the top of the boulder dropped down.
RMS Values:
STEP |
COMPAREOBJ(cm)(w/ trans) |
CompareOBJ (cm) w/o trans |
compMapVec(cm) |
NOTES |
step01 |
1.73 |
ND |
32.9 |
align by hand |
step02 |
2.79 |
29.1 |
30.1 |
|
step03 |
3.62 |
27.2 |
27.7 |
|
step05 |
4.89 |
24.1 |
24.0 |
|
step10 |
5.21 |
19.7 |
18.8 |
|
step15 |
4.44 |
17.5 |
15.5 |
start autoalign at 16 |
step20 |
3.89 |
15.2 |
11.2 |
|
step30 |
3.03 |
14.3 |
8.88 |
|
step40 |
2.21 |
13.9 |
7.58 |
|
step50 |
1.72 |
13.3 |
6.17 |
|
step100 |
0.96 |
13.4 |
3.66 |
|
step150 |
1.33 |
12.8 |
0.32 |
CompMapVec dropped 10x |
step200 |
1.74 |
12.4 |
1.46 |
CompMapVec increased |
Traces:
Landmark Display:
step01 
step200 
step300 
Run the model even further:
Run the model out many iterations further and track the RMS for CompareOBJ with and without translate.
step300 