= Test11N: =
Building topography with Sun position at 30, 0, -30, S/C Az every 45, S/C zenith 45

= Results Summary: =
CompareOBJ with translate is probably meaningless. CompareOBJ without translate is better, but is still quite different from compMapVec (10cm vs 1cm). Once I started auto aligning the top of the boulder dropped down.

= RMS Values: =

||STEP||COMPAREOBJ(cm)(w/ trans)|| CompareOBJ (cm) w/o trans || compMapVec(cm)||NOTES||
||step01 ||         1.73||     ND     ||                 32.9 ||     align by hand||
||step02      ||    2.79  || 29.1   || 30.1||||
||step03        ||  3.62  ||  27.2 ||   27.7||||
||step05   ||       4.89  ||  24.1 ||   24.0||||
||step10    ||      5.21  ||  19.7 ||   18.8||||
||step15       ||   4.44 ||   17.5 ||  15.5 ||     start autoalign at 16||
||step20       ||   3.89  ||  15.2||   11.2||||
||step30       ||   3.03  || 14.3  ||  8.88||||
||step40      ||    2.21  ||  13.9  || 7.58||||
||step50        ||   1.72  ||   13.3 ||  6.17||||
||step100        || 0.96   || 13.4  ||   3.66||||
||step150  ||       1.33 ||  12.8  || 0.32 || CompMapVec dropped 10x||
||step200   ||      1.74   || 12.4  || 1.46|| CompMapVec increased||

= Traces: =
{{attachment:out50.png}}

= Landmark Display: =
step01 {{attachment:display01.jpg}}

step200 {{attachment:display200.jpg}}

step300 {{attachment:300_display.jpg}}

= Run the model even further: =
Run the model out many iterations further and track the RMS for CompareOBJ with and without translate.

{{attachment:MOD20N_RMS_both.png}}

step300 {{attachment:300_comp_MOD20N.png}}