Differences between revisions 11 and 14 (spanning 3 versions)

Test 10: UltraFeatureF2

Purpose of test: To obtain highest possible topographic accuracy and resolution for features such as 2m wide boulders and craters, given perfect camera position and pointing and optimal SPC image suite.

Subtest of not holding old landmarks when doing the next tiling step (Diane)
All

Data

Data was generated by Imager_mg using shape3.8 on ormacsrv1.
PT10A - Centered at the middle of TAG site one.
- Image resolution is 1cm, taking roughly at 800m from center of surface (Chris, is this correct).
- emission
  - Every 20 degrees azimuth, 45 zenith angle
- incidence
  - 0, 90, 180, 270, 45 zenith angle
  - 135 azimuth, 30 zenith angle
PT10B, PT10C, PT10D, PT10E, PT10F, matches Lockheed Features 1-5 respectively.
- Lockheed features were the suite from October. We used the ones from the TAG site.
- Image resolution is 0.25cm.

Five features have been identified in TAG site 1. For each feature the following bigmaps will be tiled and evaluated:

Test Step	Bigmap Resolution	Tiling Resolution	Ground Sample Distance	Bigmap Width	Q size
Tiling	2cm	1.5cm	N/A	2.5m	85
Tiling	1cm	0.8cm	N/A	2.5m	160
Tiling	0.5cm	0.4cm	N/A	2.5m	315
Evaluation	N/A	N/A	0.5cm	2m	200

Lockheed Features -- Oct 2015

MMAPL1 -9.203 262.089 - Diane
MMAPL2 -6.500 263.519 - Kris
MMAPL3 -7.683 261.658
MMAPL4 -8.054 263.091 - Eric
MMAPL5 -8.858 263.551 - John

-  ⇤ ← Revision 11 as of 2015-10-06 14:56:53 → 
  Size: 913
  Editor: DianeLambert
  Comment:
+   ← Revision 14 as of 2015-10-08 23:49:52 → ⇥
  Size: 1577
  Editor: EricPalmer
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
-Line 5:
+Line 4:
+ * Subtest of not holding old landmarks when doing the next tiling step (Diane)
 * All

== Data ==
 * Data was generated by Imager_mg using shape3.8 on ormacsrv1.
 * PT10A - Centered at the middle of TAG site one.  
  * Image resolution is 1cm, taking roughly at 800m from center of surface (Chris, is this correct).  
  * emission
    * Every 20 degrees azimuth, 45 zenith angle
  * incidence
    * 0, 90, 180, 270, 45 zenith angle
    * 135 azimuth, 30 zenith angle
 * PT10B, PT10C, PT10D, PT10E, PT10F, matches Lockheed Features 1-5 respectively.  
  * Lockheed features were the suite from October.  We used the ones from the TAG site.
  * Image resolution is 0.25cm.
-Line 6:
+Line 21:
+||'''Test Step''' ||'''Bigmap Resolution''' ||'''Tiling Resolution''' ||'''Ground Sample Distance''' ||'''Bigmap Width''' ||'''Q size''' ||
||Tiling ||2cm ||1.5cm ||N/A ||2.5m ||85 ||
||Tiling ||1cm ||0.8cm ||N/A ||2.5m ||160 ||
||Tiling ||0.5cm ||0.4cm ||N/A ||2.5m ||315 ||
||Evaluation ||N/A ||N/A ||0.5cm ||2m ||200 ||
-Line 7:
+Line 27:
-|| '''Test Step''' || '''Bigmap Resolution''' || '''Tiling Resolution''' || '''Ground Sample Resolution''' || '''Bigmap Width''' || '''Q size''' ||
|| Tiling || 2cm || 1.5cm || N/A || 2.5m || 85 ||
|| Tiling || 1cm || 0.8cm || N/A || 2.5m || 160 ||
|| Tiling || 0.5cm || 0.4cm || N/A || 2.5m || 315 ||
|| Evaluation || N/A || N/A || 0.5cm || 2m || 200 ||
-Line 17:
+Line 33:
- * MMAPL2 -6.500 263.519
+ * MMAPL2 -6.500 263.519 - Kris