Differences between revisions 1 and 5 (spanning 4 versions)

Block 13 - BuildShape V2

Description

Steps to build, review and install a shape model

Procedure

Set-up

Bob uses a copy/paste technique that is normally held in a support file densify-cut paste. I've created a script in /opt/local/spc/bin called buildShape.sh <version> that will do the same thing in batch. It also runs view_shape to make the 8 views of the object for easy evaluation.

To make the script easier, set this variable

shapeVar=farV03
echo "Building the shape with suffix shapeVar = $shapeVar" >> notes

```
buildShape.sh $shapeVar
```

When this is done, you will have

dum-far320v1
shape-far320v1-64
shape-far320v1-128
shape-far320v1-256
shape-far320v1-512
shape.log. A log file that saves the commands and output

Evaluate Final Results

Check to see if the offset of the centroid from the center of the system is less than the required criteria (suggest 1/2 image pixel).

cd SHAPEFILES
echo shape-$shapeVar-512 | shape_info | tee -a ../notes
cd ..

Install Shape

If you like the results, you can instal the model. Review the red/blue or side-by-side images to ensure the model is good. If it isn't then uninstall the model.

relink shape-$shapeVar.txt SHAPE.TXT | tee -a notes
evalReg.sh lsupport/theEight

Finish the Block

Once that is done, you should iterate on it at least once and rebuild the shape (go back to the top of this procedure until the shift is less than the criteria.

```
echo 9 | blockFinish far\
```

(Compiled by EEP)

-  ⇤ ← Revision 1 as of 2018-11-20 11:15:37 → 
  Size: 1493
  Editor: EricPalmer
  Comment:
+   ← Revision 5 as of 2018-11-20 16:48:15 → ⇥
  Size: 1678
  Editor: EricPalmer
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 15:
+To make the script easier, set this variable
-Line 16:
+Line 17:
-   buildShape.sh farV01
+shapeVar=farV03
echo "Building the shape with suffix shapeVar = $shapeVar" >> notes
-Line 18:
+Line 20:
+   {{{
buildShape.sh $shapeVar
   }}}
-Line 28:
+Line 36:
+=== Evaluate Final Results ===

Check to see if the offset of the centroid from the center of the system is less than the required criteria (suggest 1/2 image pixel).

   {{{
cd SHAPEFILES
echo shape-$shapeVar-512 | shape_info | tee -a ../notes
cd ..
   }}}



=== Install Shape ===
If you like the results, you can instal the model.  Review the red/blue or side-by-side images to ensure the model is good.  If it isn't then uninstall the model.
   {{{
relink shape-$shapeVar.txt SHAPE.TXT | tee -a notes
evalReg.sh lsupport/theEight
   }}}

=== Finish the Block ===
Once that is done, you should iterate on it at least once and rebuild the shape (go back to the top of this procedure until the shift is less than the criteria.

   {{{
echo 9 | blockFinish far\
   }}}
-Line 33:
+Line 66:
-=== Evaluate Final Results ===

Check to see if the offset of the centroid from the center of the system is less than the required criteria (suggest 1/2 image pixel).

{{{
   shape_info
     shape-far320v1-128
}}}

If you need to shift it, run the [[shift]] command
{{{
   shift
   -OffsetX -OffsetY -OffsetZ
   y
   shape-far320v1-128
   n
   y

   geometry
   20
   1
   n
   n
}}}


Once that is done, you should iterate on it at least once and rebuild the shape (go back to the top of this procedure until the shift is less than the criteria.





=== Install Shape ===
{{{
   relink shape-far320-128 SHAPE.TXT
   evalReg.sh lsupport/theEight
}}}





=== Finish the Block ===
{{{
  echo 8 | blockFinish far\
}}}