Diff for "LIMBER.IN"

Differences between revisions 5 and 6

This sets the parameters that limber uses.

Ryugu

'SHAPEFILES/SHAPE.TXT' Initial (Nolan q=64) ICQ model (need to update this each time, or make sure SHAPE.TXT is the current model)
1         appears in LIMVECS.TXT if d > 90 pixels 
1         PICNM.LIM created if d > 90 pixels
20        Max search range in image pixels
2         Search expansion factor (higher values search further away, Bob says to use a value of 3 with impunity)
10        Max height wrt SHAPE (scale units, in shape units. So a higher Q will result in a smaller scale unit. Scale unit in physical distance is something like "diameter of body"/Q)
12        Max phase for terminators (degrees)

Calypso

max search range in pixels down to 10 (from 100) because Calypso is so tiny.
max phase for terminators to 10, then 20, then 30 because he wasn’t liking the results.
max height wrt shape down to 10, then up to 15
scaling factor up to 4, then down to 3.

Lutetia

LMX=20
Zhgt=25
Vres=15
Zres=15

67CG

LMX=99
Zhgt=50
Vres=10
Zres=15
ZEXP=2

-  ⇤ ← Revision 5 as of 2017-12-12 12:36:57 → 
  Size: 1104
  Editor: JohnWeirich
  Comment:
+   ← Revision 6 as of 2017-12-12 12:39:40 → ⇥
  Size: 1125
  Editor: JohnWeirich
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 12:
-Max height wrt SHAPE (scale units, in shape units. So a higher Q will result in a smaller scale unit. Scale unit is something like "diameter of body"/Q)
+Max height wrt SHAPE (scale units, in shape units. So a higher Q will result in a smaller scale unit. Scale unit in physical distance is something like "diameter of body"/Q)