Differences between revisions 12 and 22 (spanning 10 versions)

Dec 2016. I'm using this to track the status of the regression for each of the modules. Some links are not current (they are old and should be removed). The status will be documented TBD.

General Differences

CSPLOT.TXT and CSPLOT.ppm - Polar plots showing the position of the images for a specific maplet. New feature autogenerated by LITHOS. Present in most LITHOS outputs and do not constitute a deviation.
The default reflectance model changed from the old standard without a factor of (McEwen Abstract) to the published modified Lom/Seg (McEwen Paper). To deal with this, I had to set the MCEWEN variable in INIT_LITHOS.TXT. It is in the root directory and replace after sync and right before running the script.
fullRun.log. when running lithos, we get an extra menu option
1. Normal from larger map
TMPLIST.TXT is created with LITHOS. It is not essential.
Clean from prior -- This term is defined for tests that are sequential. Some tests require a specific order. Because the previous test failed, the normal running on this test will (by design) also fail. If that is the case, I reran the test, but using the state from the previously successful test (output-*.* copied over). Then I ran the test again and report it's results. This allows us to see if the module works correctly itself, and not a reflection of a sequence of tests.
albedo.f TPARS values from discussion with Bob (JRW)

- Test_Procedures

Modules

Bennu specific Setup

- 1.1 res_process_img

Must be Bennu specific. Need MapCam, NavCam and PolyCam

- 1.2 PolyCam process_fits

- 1.3 NavCam process_fits

Dawn

Dawn-base

- Bring in images and update

7.1 res_make_sumfiles
7.2 res_make_pictlistX

- 7.3 res_pole (Long lunch, large change)

Dawn-partial

2.3 Register	res_register	Clean
2.4 Dynamics (large output)	res_dynamics	Significant
2.6 Coverage_p (get lunch)	res_dynamics	Clean
2.11 Blemishes	res_blemishes	Clean

- Autoregister sequence

2.7 Autoregister	res_autoregister	Clean
2.5 Make_list	res_make_list	Clean

- Batch autoregister sequence

2.8 Make_scriptA prep	res_make_scriptA	Clean
2.12 Make_scriptA run	res_do_make_scriptA	Clean

- Batch parallel autoregister

2.9 Make_scriptAP prep	res_make_scriptAP	Clean
2.13 Make_scriptAP run	res_do_make_scriptAP	Clean

- Batch Register

2.10 Make_scriptR prep	res_make_scriptR	Clean
2.14 Make_scriptR run (Data do not support batch mode)	res_make_scriptR	N/A

Dawn-image

This state has several LAMO images ingested into the system. There are no new landmarks. The shape model is well defined and stable. There are no specific bigmaps for the test region.

3.1 Lithos Create	res_lithos_create	Clean
3.2 Bigmap	res_bigmap	Significant
3.3 Showmap	res_showmap	Clean
3.4 SpheremapB (Get some coffee)	res_spheremapB -	Clean
3.5 Display	res_display	Clean
3.6 Make_tilefile	res_make_tilefile	Clean
3.10 Lithos tuck	res_lithos_tuck	Clean
3.11 BigmapL	res_bigmapL	Different
3.12 Make_tiles	res_maketiles	Clean
3.13 Make_tilesP	res_maketilesP	Clean

Dawn-land

This state has a single landmark defined, TEST01. It is in the center of our testing region, based to show details of the pits within Marcia crater. It has HAMO and LAMO images already connected to the landmark and aligned. No overlaps or updated topography. Heights are from an existing bigmap.

Notes: lithos update is done for most lithos commands. It will not be explicitly tested because saving the data is required for most of the tests.

4.1 Lithos Delete	res_lithos_delete	Clean
4.2 Lithos Find Images	res_lithos_find_images	Clean
4.3 Lithos Change Resolution	res_lithos_change_resolution	Clean
4.4 Lithos Build Template	res_lithos_build_template	Clean
4.7 Lithos Exclude By Correlation	res_lithos_exclude_by_correlation	Clean
4.8 Lithos Exclude Automatically	res_lithos_exclude_automatically	Clean
4.9 Lithos Manual Exclude	res_lithos_manual_exclude	Clean
4.10 Lithos No Exclude	res_lithos_no_exclude	Clean
4.11 Lithos Heights From Map	res_lithos_heights_from_map	Clean
4.12 Lithos Heights From Shape	res_lithos_heights_from_shape	Clean
4.13 Lithos Normal From Height	res_lithos_normal_from_height	Clean
4.14 Lithos Normal From Shape	res_lithos_normal_from_shape	Clean
4.16 Map Coverage	res_map_coverage	Minor. coverage_m was updated to deal with maps that are too far from the level (deal with multiple surfaces that shouldn't show)
4.17 Lithos Overlaps	res_lithos_overlaps	Clean
4.18 Lithos Build Terrain	res_lithos_build_terrain	Different
4.19 Lithos Complex Overlap	res_lithos_complex_overlap	Clean

- Shift - These are paired in sequence

4.5 Lithos Manually Shift	res_lithos_manually_shift	Clean
4.6 Lithos Auto Correlate	res_lithos_auto_correlate	Clean
4.* Lithos Compute SCOBJ "V1"

Dawn-land360

This contains 361 maplets that tiles REFMAP. It only has the processing done for doing the batch tiling procedures. The goal for this stage is developing mature topography.

5.1 Duplicates	res_duplicates	Clean
5.2 Make_lmrklistX	res_make_lmrklistx	Clean

- Do parallel processing - LONG (1/2 day)

5.3 Make_scriptP	res_make_scriptP	run_script0*.b differs - No longer copies over SHAPE.TXT (not needed)
5.4 LITHOSP	res_lithosP	Significant
5.5 find_nofitP	res_find_nofitP	Clean from prior

- Work on export/import - LONG (1/2 day)

5.7 Export	res_export
5.8 Import	res_import	Significant
5.9 make_scriptF	res_make_scriptF	Significant
5.10 run_script from make_scriptF	run_make_scriptF	Significant
5.11 find_nofit	res_find_nofit	Significant

- Group for doing tiles - LONG (1/2 day)

5.12 make_scriptT	res_make_scriptT	Clean
5.13 run_script from make_scriptT	run_make_scriptT	Significant
5.14 find_nofitT	res_find_nofitT	Clean from prior

Dawn-Topo

This contains a full suite of tiles for REFMAP (360 maplets). It has been well processed and has fully developed topography.

- Making shape files

6.2 Dumber (yes, do this one first)	res_dumber	Clean
6.1 Densify - (Get lunch)	res_densify	Differ
6.10 DensifyA - (Get lunch)	res_densifyA	Differ
6.9 Dumber with A	res_dumber_with_A	Differ
6.4 Geometry (large changes)	res_geometry	Differ
6.5 Residuals	res_residuals	Differ
6.6 Regres	res_regres
6.7 Shape_info	res_shape_info	Clean

-  ⇤ ← Revision 12 as of 2016-12-15 00:33:46 → 
  Size: 6039
  Editor: EricPalmer
  Comment:
+   ← Revision 22 as of 2017-02-13 14:37:33 → ⇥
  Size: 7489
  Editor: JohnWeirich
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 9:
-- CSPLOT.TXT and CSPLOT.ppm - Polar plots showing the position of the images for a specific maplet.  New feature autogenerated by [[LITHOS]].  Present in most LITHOS outputs and do not constitute a deviation.
- The default reflectance model changed from the old standard without a factor of (McEwen Abstract) to the published modified Lom/Seg (McEwen Paper).  To deal with this, I had to set the MCEWEN variable in INIT_LITHOS.TXT.  It is in the root directory and replace after sync and right before running the script.
+ * CSPLOT.TXT and CSPLOT.ppm - Polar plots showing the position of the images for a specific maplet.  New feature autogenerated by [[LITHOS]].  Present in most LITHOS outputs and do not constitute a deviation.
 * The default reflectance model changed from the old standard without a factor of (McEwen Abstract) to the published modified Lom/Seg (McEwen Paper).  To deal with this, I had to set the MCEWEN variable in INIT_LITHOS.TXT.  It is in the root directory and replace after sync and right before running the script.

 * fullRun.log.  when running lithos, we get an extra menu option
     5. Normal from larger map

 * TMPLIST.TXT is created with LITHOS.  It is not essential.

 * Clean from prior -- This term is defined for tests that are sequential.  Some tests require a specific order.  Because the previous test failed, the normal running on this test will (by design) also fail.  If that is the case, I reran the test, but using the state from the previously successful test (output-*.* copied over).  Then I ran the test again and report it's results.  This allows us to see if the module works correctly itself, and not a reflection of a sequence of tests.

 * [[albedo.f]] TPARS values from discussion with Bob (JRW)
-Line 106:
+Line 115:
-|| 4.18 Lithos Build Terrain || [[res_lithos_build_terrain]] || ||
|| 4.19 Lithos Complex Overlap || [[res_lithos_complex_overlap]] || ||
+|| 4.18 Lithos Build Terrain || [[res_lithos_build_terrain]] || Different ||
|| 4.19 Lithos Complex Overlap || [[res_lithos_complex_overlap]] || Clean ||
-Line 113:
+Line 122:
+|| 4.* Lithos Compute SCOBJ "V1" ||   || ||
-Line 118:
+Line 128:
-- 5.1 [[res_duplicates]]

- 5.2 [[res_make_lmrklistx]]
+|| 5.1 Duplicates || [[res_duplicates]] || Clean ||
|| 5.2 Make_lmrklistX || [[res_make_lmrklistx]]   || Clean ||
-Line 124:
+Line 132:
- * 5.3 [[res_make_scriptP]]
 * 5.4 [[res_lithosP]] 
 * 5.5 [[res_find_nofitP]]
+|| 5.3 Make_scriptP || [[res_make_scriptP]]  || run_script0*.b differs - No longer copies over SHAPE.TXT (not needed) ||
|| 5.4 LITHOSP || [[res_lithosP]]   || Significant ||
|| 5.5 find_nofitP  || [[res_find_nofitP]]  || Clean from prior ||
-Line 129:
+Line 137:
- * 5.7 [[res_export]]
 * 5.8 [[res_import]]
 * 5.9 [[res_make_scriptF]]
 * 5.10 [[res_make_scriptF]]
 * 5.11 [[res_find_nofit]]
+|| 5.7 Export || [[res_export]]  || ||
|| 5.8 Import || [[res_import]]  || Significant ||
|| 5.9 make_scriptF || [[res_make_scriptF]]  || Significant ||
|| 5.10 run_script from make_scriptF || [[run_make_scriptF]]  || Significant ||
|| 5.11 find_nofit || [[res_find_nofit]]  || Significant ||
-Line 136:
+Line 144:
-  * 5.12 (was 3.7) [[res_make_scriptT]] 
  * 5.13 (was 3.8) [[res_make_scriptT]]
  * 5.14 (was 3.9) [[res_find_nofitT]]
+|| 5.12 make_scriptT || [[res_make_scriptT]]   || Clean ||
|| 5.13 run_script from make_scriptT ||  [[run_make_scriptT]]  || Significant ||
|| 5.14 find_nofitT || [[res_find_nofitT]]  || Clean from prior ||
-Line 146:
+Line 154:
- * 6.2 [[res_dumber]]  (yes, do this one first) 
 * 6.1 [[res_densify]] - (Get lunch)
 * 6.10 [[res_densifyA]] - (Get lunch)
 * 6.9 [[res_dumber_with_A]]

- 6.4 [[res_geometry]] (large change)

- 6.5 [[res_residuals]]

- 6.6 [[res_regress]] 

- 6.7 [[res_shape_info]]
+|| 6.2 Dumber (yes, do this one first)  || [[res_dumber]]  || Clean ||
|| 6.1 Densify - (Get lunch)|| [[res_densify]]   || Differ ||
|| 6.10 DensifyA - (Get lunch)|| [[res_densifyA]]  || Differ ||
|| 6.9 Dumber with A || [[res_dumber_with_A]]  || Differ ||
|| 6.4 Geometry (large changes)|| [[res_geometry]]   || Differ ||
|| 6.5 Residuals || [[res_residuals]]  || Differ ||
|| 6.6 Regres || [[res_regres]]   ||  ||
|| 6.7 Shape_info || [[res_shape_info]]  || Clean ||