Describe SPC_V_and_V_testing here.

Test Info

Here is where we are putting the details of the test

Test01 - FirstBoulder - John, Tanner, Kris
Test02 - BouldersDetail - John
Test03 - ControlledCalibrationTest -- Simple peak on a flat surface - Eric
Test04 - CalibrationF2-Approach, Tanner, Kris
Test05 - OptimalF2 - All
Test06 - FindHeights - John. Figure out which options on Find Heights caused a divergent solution
Test07 - BoulderEmission - John. Test if better emission angles allows better representation of the boulder
Test08 - OptimalUltraF2 - Diane, Tanner
Test09 - OrbitBUltra - Kris, Tanner
Test10 - UltraFeatureF2, All
Test11 - ReferencePeaks, All. Link to Local Tilt results.
Test12 - Crater, Eric

Other test that might be useful

Add noise into the maplet, and see if the good parts remain and the poor parts go away
Surface with simple craters of the same size
Features with specific slopes to evaluate how steep SPC can go

Projects

Fourier transform - Kris, Diane
Mambo_5 - Kris. Polar plots to describe quality of observations
DirtySumfiles - Kris. Creates SUMFILES that can be used with creator_mg and creator_grid to make images a specific spacecraft az/zenith and sun az/zenith
Whatcamacallit_11 - Tanner. Tool to show how much maplets shift in 3D space to a truth model

When to Backup

Make the following aliases

alias doneStep='rm -r step*'
alias murphy='rsync -hapvP LMKFILES/ ../back-landmarks'

Calibration -- When you are done with a tiling procedures and the needed iterations, you will ensure your logs are up to date and statistics computed, then run rsync to backup the directory. Also, remove the old statistics directories (step75-a)

cd ..
rsync -hapvP --exclude=IMAGEFILES Bennu /Volumes/Share/Shared/SPC-share/<yourid>/2015-07-01-Apch-75cm
cd Bennu
doneStep

For each step (tiling and iteration), you will want to run statistics and copy the needed output into a directory (step75-a).
Make a temporary backup of only the landmarks files (LMKFILES/)
- This will over write the previous ones, but that's okay because this is only for your use if you mess up some of them on the next step.
- rsync -hapvP LMKFILES/ ../back-landmarks
- Make an alias for this

mkdir step75-a
move bunch of stuff into step75-a
murphy

File Structure

Many things are kept on ormacsrv1.lpl.arizona.edu

Official testing workspace

/SPC_Test
/SPC_Test/F1a -- Dr. Gaskell's test
/SPC_Test/F1b -- Dr. Palmer's test
/SPC_Test/shape3 -- this has the official images needed for the test (only those from Freespace).
- PICTLIST.TXT-App -- this has PICTLIST.TXT for each mission phase. Do a symbolic link to it
- PICTLIST.TXT-App.PS -- this has PICTLIST.TXT for each mission phase. Do a symbolic link to it
- PICTLIST.TXT-App.PS.DS -- this has PICTLIST.TXT for each mission phase. Do a symbolic link to it
- PICTLIST.TXT-App.PS.DS.OB -- this has PICTLIST.TXT for each mission phase. Do a symbolic link to it
- mapConf -- Stores the BIGMAP input files to form them. There is a "truth" directory that stores the definitions used to form the truth version (that start with a T)

Support and backup data

/Volumes/Share/Shared/SPC-share/SubComp -- Results from the previous System SubComponent Test
/Volumes/Share/Shared/SPC-share/Component -- Results from the previous System Component Test
/Volumes/Share/Shared/SPC-share/F1b -- Saved checkpoints from the F1b test
/Volumes/Share/Shared/SPC-share/shape3-original -- The Freespace source tar.gz files
/Volumes/Share/Shared/SPC-share/truth-bigmaps -- Working directory that has the 5cm (Q=550) BIGMAPS that is Shape3.7
/Volumes/Share/Shared/SPC-share/bennu-image-generate -- Working directory that has the 7000 5cm (tiny) MAPLETS, Shape3.4
/Volumes/Share/Shared/SPC-share/kdrozd -- Backup directories for their tests
/Volumes/Share/Shared/SPC-share/tcampb -- Backup directories for their tests
/Volumes/Share/Shared/SPC-share/jweirch -- Backup directories for their tests

README for major directories

For each top directory in SPC-share and /SPC_Test we need a README that describes the following

README

Purpose of the directory
Major subdirectories and their function
Who created it
Log
- Date
  - What changes were made
- Date
  - More changes
- etc.

Test Log Files

For each major step (such as a sequence of tiling and iterations), please create a log file in the working directory. When you start a tiling sequence, update it to the current info testLog.txt

Date
Who is running the test
Test Number/Subtest
Test Name
What is the goal of the test
Log
- Date
  - Major procedures or techniques
  - Names of BIGMAPs created
  - Parameters used for tiling or other actions
  - Seed file used for make_script*.seed and changes to that file
  - Problems noted and solutions used

Who does which resolutions

Kris

Tanner

Locations for Testing

This just lists what we are using for easy reference.

Title	Latitude	Longitude	Feature
TAG 1:	-8.027	262.768W	TAG
TAG 2:	-10.232	334.156W	TAG
TAG 3:	+42.525	114.719W	TAG
Region 1:	-30.000	220.000W	Smooth
Region 2:	-7.000	270.000W	Smooth - Not used
Region 3:	+44.000	199.000W	Smooth
Region 4:	-53.000	59.000W	Smooth
Region 5:	+3.000	41.000W	Smooth
Region 6:	+0.000	301.000W	Rough - Not used
Region 7:	+0.000	335.000W	Rough - Not used
Region 8:	+0.069	319.800W	Rough
Region 9:	+0.000	140.000W	Rough
Boulder 1:	+30.597	190.232W	2.77m
Boulder 2:	-33.488	40.817W	4.07m
Boulder 3:	+18.459	222.335W	8.24m
Boulder 4:	TBD
Boulder 5:	TBD

Bigmap Names

These are some names of the bigmaps that will be used during testing. Truth Shape

TTAG15 - Truth TAG site1, GSD 5cm and 1001x1001 (50x50m)
TTAG25 - Truth TAG site2, GSD 5cm and 1001x1001 (50x50m)
TTAG25 - Truth TAG site3, GSD 5cm and 1001x1001 (50x50m)
TTAG10 - Truth TAG site1, GSD 10cm and 1001x1001 (100x100m)
T15-2K - Truth TAG site1, GSD 5cm and 2001x2001 (100x100m)
T12-5K - Truth TAG site1, GSD 2cm and 5001x5001 (100x100m)
TREG01 - Region 1, GSD 5cm and 1001x1001 (50x50m)
etc.
TEST01 to 7 - Truth TAG site1, GSD of 5cm with different parameters for each. 1-5 are different sizes while 6 and 7 have a slightly different starting location (a few hundredths of a degree -- a few meters)
TJW003 - Boulder 2, GSD 5cm and 1001x1001 (50x50m)
TJW004 - Boulder 1, GSD 5cm and 1001x1001 (50x50m)
TJW005 - Boulder 3, GSD 5cm and 1001x1001 (50x50m)

The names of the model are similar, except the T (for truth) is replaced with M (for model)

MTAG15 - Truth TAG site1, GSD 5cm and 1001x1001 (50x50m)
MTAG25 - Truth TAG site2, GSD 5cm and 1001x1001 (50x50m)
MTAG25 - Truth TAG site3, GSD 5cm and 1001x1001 (50x50m)
MREG01 - Region 1, GSD 5cm and 1001x1001 (50x50m)
MJW003 (or BJW003) - Boulder 2, GSD 5cm and 1001x1001 (50x50m)
MJW004 (or BJW004)- Boulder 1, GSD 5cm and 1001x1001 (50x50m)
MJW005 (or BJW005)- Boulder 3, GSD 5cm and 1001x1001 (50x50m)

Other -- These names don't conflict with the standards of SPC.

TJW001 - Truth bigmaps for John
TTC### - Truth bigmaps for Tanner
TKD### - Truth bigmaps for Kirs
TEP### - Truth bigmaps for Eric
MJW001 - Working bigmaps for John
MTC### - Working bigmaps for Tanner
MKD### - Working bigmaps for Kirs
MEP### - Working bigmaps for Eric

Source bigmaps (the truth that made up the truth)

*The original maplets are stored in /Volumes/Share/Shared/BENNUV3 *The Shape3.7 bigmaps come from /Volumes/Share/Shared/Eric_Bob

A working copy is in /Volumes/Share/Shared/SPC-share/truth-bigmaps
We ran about 1 degree bins (Q=550 at 5cm)
ZS0101
ZS####
ZN####

*The Shape3.8 bigmaps are in /Volumes/Share/Shared/Eric_Bob

B00001
B#####

Naming Scheme for Boulder Maplets

Only 6 characters can be used for the naming of maplets because Bob says so.

Choose style		book: Create a structured PDF document with headings, chapters, etc. webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output. continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title		Title of the document for the front page.
Heading 1 as title		Extract the first heading of the document and use it as title. If checked the title field has no effect.
Title file/image		The title image or HTML page. These file has to be an attachments!
Version		Specify document version to be displayed on the title page.
Author		Intellectual property owner of this document.
Copyright		Copyright notice for this document.
Apply page information		Information about who and when modified the document are applied at the end.

Output format		Specifies the output format.
Output options	Grayscale document Title page Compression : JPEG big images

Body color		Enter the HTML color for the body (background).
Body image		Enter the image file for the body (background). These file has to be an attachments!
Text color		Enter the HTML color for the text.
HTTP links color		Sets the color of links.
Style of HTTP links
Create HTTP links		Enables generation of links in PDF files.

Base font size		Set the default size of text.
Line spacing		Set the spacing between lines of text.
Body typeface		Choose the default typeface (font) of text.
Heading typeface		Choose the default typeface (font) of headings.
Header/Footer size		Set the size of header and footer text.
Header/Footer font		Choose the font for header and footer text.
Charset set		Change the encoding of the text in document.
Embed fonts		Check to embed font in the output file.

Page mode		Controls the initial viewing mode for the document. Document: Displays only the docuemnt pages. Outline: Display the table-of-contents outline as well as the document pages. Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Page layout		Controls the initial layout of document pages on the screen. Single: Displays a single page at a time. One column: Displays a single column of pages at a time. Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
First page		Choose the initial page that will be shown.

Input

Output

Page

Contents

Colors

Fonts

PDF

Security

Expert

About