Differences between revisions 1 and 6 (spanning 5 versions)

Software Check In and Status

Program	Version	Location	Date Received	Changes	Current Status
FITS2MAP			06/15/16
LOCAL RESIDUALS			05/24/16	Option v/2 revised - outputs picnm, number of picture in array and px/ln residuals
PROCESS_FITS			05/24/16	Distinguishes between msb and lsb and also between signed and unsigned short.
AUTOREGISTER	3.1B0		05/18/16	0ption 4a changed to flag high res/scale landmarks.
REGISTER	3.1B0		05/18/16	Pole rotation added to R option Update of sun direction added (I) Nominal or tabular pck choice in option 7.
IPLSCOBJ	3.1B0		05/18/16	Wobble significantly revised. Exact a priori used in dxR and Dxr frames. If image hidden in .LMK file, landmark not used here.
IPL2SCOBS_LO	3.1B0		05/18/16	Wobble significantly revised. Exact a priori used in dxR and Dxr frames. If image hidden in .LMK file, landmark not used here.
COMMON/	3.1B0		05/18/16	SUBROUTINES REMOVED FROM COMMON:<<BR>>GET_HEIGHTS_LO<<BR>>GET_MODEL_LO<<BR>>MAXLEN_LO
COMMON/	3.1B0		05/18/16	SUBROUTINES ADDED TO COMMON:<<BR>>HIDE<<BR>>SHADOWMAP<<BR>>DELETEINPIC_LMK_LO
LITHOS	3.1B0		05/18/16	Autosearch in option B only looks for bigmaps if no maplet found. Replicated maplet can be RECENT (or r). E options include r that flags all images in a landmark except those in PICTLISTR.TXT (if it exists) as no topo. Option 2^{menu relabled.<<BR>>Option 2}/3 added to interpolate permanently shadowed areas. Noted that PMX=1250 is maximum allowed by compiler (see below). Eliminates excess images NPIX>PMX. DN1 put in common block ARRAY. Version code replaced with INCLUDE file. DNK put in common block IMAGES. New image emission limit changed from 84 deg to 75 deg. TEMPLIST created in LIMB_HEIGHTS to reduce subsequent limb search. TEMPLIST deleted on initial input. BELL keword included in INIT_lithos. If BELL=.FALSE. warning bell turned off. NPIX0 included to enable E/n option to work with hidden images. B option can now take RECENT (or r or R) as an input. Additional normal (N) option from larger map. Single image input set up to take list
LITHOSP	3.1B0		05/18/16	Status changed in DISPLAY to produce proper sized displays. E option to eliminate low correlating maplets added. Option 2^{menu relabled.<<BR>>Option 2}/3 added to interpolate permanently shadowed areas. Lockout put on LMKNM.MAP instead of LMRKLISTX.TXT Test for too many images included on input. Process stops if NPIX>PMX. DN1 put in common block ARRAY. Version code replaced with INCLUDE file. DNK put in common block IMAGES. TEMPLIST created in LIMB_HEIGHTS_LO to reduce subsequent limb search. TEMPLIST deleted on initial input and quit
DYNAMICS	3.1B0		05/18/16	Max images before and after set from INIT_LITHOS (DYNO=)
POLE	3.1B0		05/18/16	Protection against accidental update added. Images restricted to ET0 +/- SPAN (days).
BLEMISHES	3.1B0		05/18/16	None.
GEOMETRY	3.1B0		05/18/16	None.
NEW_POLE	3.1B0		05/18/16	None.
PROCESS_FITS			01/20/16	CutS off the black areas for both NCM and NFT but only if NPX.EQ.2752.

Eric's notes to Chuck:

REGISTER	3.1	Options for time-based PCK or normal Support pole rotation
REGISTERP	3.1	Options for time-based PCK or normal Support pole rotation
AUTOREGISTER	3.1	Flag for high resolution landmarks
IPLSCOBJ	3.1	Wobble redesigned Exact a priori used for dxR and Dxr
LITHOS	3.1	shows "polar" plots User interface improvements Interpolate permanently shadowed areas Support PICTLISTR.TXT in auto eliminate Decreased memory usage Assign normal vector from external map
LITHOSP	3.1	Speed improvement Added elimination low correlating maplets Interpolate permanently showed areas
	3.1	Generate and accept time-based PCK -- track the pole position
COMMON/illumin	3.1	support the LUNAR photometric function (with the factor of 2)
COMMON/flock	3.1	shorter duration for the flock wait routine
NEW_POLE	3.1	Automate updating sumfiles/nominals with the new pole position
POLE	3.1	Avoid making a file that is over padded within the filesystem Added the option to restrict the image date
MAP2LMK	3.1	Tool to convert MAPOLAs into SPC MAPLETS
PROCESS_FITS	3.1	trim NAVCAM Support level 0 data, to include flat field, blur and SPF corrections. Improve the batch ingestion of images, using a more-standard file structure

-  ⇤ ← Revision 1 as of 2016-07-12 17:03:29 → 
  Size: 999
  Editor: DianeLambert
  Comment:
+   ← Revision 6 as of 2016-07-12 17:51:13 → ⇥
  Size: 4888
  Editor: DianeLambert
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
+||FITS2MAP|| || ||06/15/16|| || ||
||LOCAL RESIDUALS|| || ||05/24/16||Option v/2 revised - outputs picnm, number of picture in array and px/ln residuals|| ||
||PROCESS_FITS|| || ||05/24/16||Distinguishes between msb and lsb and also between signed and unsigned short.|| ||
-Line 10:
+Line 13:
-||LITHOS||3.1B0|| ||05/18/16||
+||LITHOS||3.1B0|| ||05/18/16||Autosearch in option B only looks for bigmaps if no maplet found.<<BR>>Replicated maplet can be RECENT (or r).<<BR>>E options include r that flags all images in a landmark except those in PICTLISTR.TXT (if it exists) as no topo.<<BR>>Option 2^ menu relabled.<<BR>>Option 2^/3 added to interpolate permanently shadowed areas.<<BR>>Noted that PMX=1250 is maximum allowed by compiler (see below).<<BR>>Eliminates excess images NPIX>PMX.<<BR>>DN1 put in common block ARRAY. <<BR>>Version code replaced with INCLUDE file.<<BR>>DNK put in common block IMAGES.<<BR>>New image emission limit changed from 84 deg to 75 deg.<<BR>>TEMPLIST created in LIMB_HEIGHTS to reduce subsequent limb search.<<BR>>TEMPLIST deleted on initial input.<<BR>>BELL keword included in INIT_lithos.  If BELL=.FALSE. warning bell turned off.<<BR>>NPIX0 included to enable E/n option to work with hidden images.<<BR>>B option can now take RECENT (or r or R) as an input.<<BR>>Additional normal (N) option from larger map.<<BR>>Single image input set up to take list|| ||
||LITHOSP||3.1B0|| ||05/18/16||Status changed in DISPLAY to produce proper sized displays.<<BR>>E option to eliminate low correlating maplets added.<<BR>>Option 2^ menu relabled.<<BR>>Option 2^/3 added to interpolate permanently shadowed areas.<<BR>>Lockout put on LMKNM.MAP instead of LMRKLISTX.TXT<<BR>>Test for too many images included on input.  Process stops if NPIX>PMX.<<BR>>DN1 put in common block ARRAY.<<BR>>Version code replaced with INCLUDE file.<<BR>>DNK put in common block IMAGES.<<BR>>TEMPLIST created in LIMB_HEIGHTS_LO to reduce subsequent limb search.<<BR>>TEMPLIST deleted on initial input and quit|| ||
||DYNAMICS||3.1B0|| ||05/18/16||Max images before and after set from INIT_LITHOS (DYNO=)|| ||
||POLE||3.1B0|| ||05/18/16||Protection against accidental update added.<<BR>>Images restricted to ET0 +/- SPAN (days).|| ||
||BLEMISHES||3.1B0|| ||05/18/16||None.|| ||
||GEOMETRY||3.1B0|| ||05/18/16||None.|| ||
||NEW_POLE||3.1B0|| ||05/18/16||None.|| ||
||PROCESS_FITS|| || ||01/20/16||CutS off the black areas for both NCM and NFT but only if NPX.EQ.2752.|| ||
-Line 12:
+Line 22:
-||FITS2MAP||
+Eric's notes to Chuck:
||REGISTER|| ||3.1|| ||Options for time-based PCK or normal<<BR>>Support pole rotation|| ||
||REGISTERP|| ||3.1|| ||Options for time-based PCK or normal<<BR>>Support pole rotation|| ||
||AUTOREGISTER|| ||3.1|| ||Flag for high resolution landmarks|| ||
||IPLSCOBJ|| ||3.1|| ||Wobble redesigned<<BR>>Exact a priori used for dxR and Dxr|| ||
||LITHOS|| ||3.1|| ||shows "polar" plots<<BR>>User interface improvements<<BR>>Interpolate permanently shadowed areas<<BR>>Support PICTLISTR.TXT in auto eliminate<<BR>>Decreased memory usage<<BR>>Assign normal vector from external map|| ||
||LITHOSP|| ||3.1|| ||Speed improvement<<BR>>Added elimination low correlating maplets<<BR>>Interpolate permanently showed areas|| ||
|| || ||3.1|| ||Generate and accept time-based PCK -- track the pole position|| ||
||COMMON/illumin|| ||3.1|| ||support the LUNAR photometric function (with the factor of 2)|| ||
||COMMON/flock|| ||3.1|| ||shorter duration for the flock wait routine|| ||
||NEW_POLE|| ||3.1|| ||Automate updating sumfiles/nominals with the new pole position|| ||
||POLE|| ||3.1|| ||Avoid making a file that is over padded within the filesystem<<BR>>Added the option to restrict the image date|| ||
|| MAP2LMK|| ||3.1|| ||Tool to convert MAPOLAs into SPC MAPLETS|| ||
|| PROCESS_FITS|| ||3.1|| ||trim NAVCAM<<BR>>Support level 0 data, to include flat field, blur and SPF corrections.<<BR>>Improve the batch ingestion of images, using a more-standard file structure|| ||