• UltraFeatureF2

Test 10: UltraFeatureF2

Purpose of test: To obtain highest possible topographic accuracy and resolution for features such as 2m wide boulders and craters, given perfect camera position and pointing and optimal SPC image suite.

• Subtest of not holding old landmarks when doing the next tiling step (Diane)
• All

Data

• Data was generated by Imager_mg using shape3.8 on ormacsrv1.
• PT10A - Centered at the middle of TAG site one.
  • Image resolution is a little over 1cm, taking roughly at 800m from center of surface (correct).
  • emission
    • Every 20 degrees azimuth, 45 zenith angle
  • incidence
    • 0, 90, 180, 270, 45 zenith angle
    • 135 azimuth, 30 zenith angle

Spacecraft:

Sun:

• PT10B, PT10C, PT10D, PT10E, PT10F, matches Lockheed Features 1-5 respectively.
  • Lockheed features were the suite from October. We used the ones from the TAG site.
  • Image resolution is 0.25cm.

Five features have been identified in TAG site 1. For each feature the following bigmaps will be tiled and evaluated:

Lockheed Features -- Oct 2015

• MMAPL1 -9.203 262.089 - Diane

• MMAPL2 -6.500 263.519 - Kris

• MMAPL3 -7.683 261.658

• MMAPL4 -8.054 263.091 - Eric

• MMAPL5 -8.858 263.551 - John

Evaluation

• TEV-L1 (1-5). Q=320, Res=0.5cm. In the truth directory as "obj" files. Slightly bigger than the bitmap so we can do CompareOBJ. Reference T15-1K
• TLOCK1 (1-5). Q=300, Res=0.5cm. In the truth directory as MAP files. Use for flatMapVec and compMapVec. Reference T15-1K