This program is used to register existing maplets with imaging data from a single image.
- adds landmarks to a single image, adding the image name to all relevant LMKFILEs
- provides basic tools for aligning the landmarks, cross-correlating new images to existing maplets, eliminating landmarks and setting image flags
- updates the S/C position and pointing in the SUMFILE when the user accepts the changes from the auto-align (or manually aligns)
autoregister aligns existing maplets with imaging data from a single image and uses subroutine IPL2SCOBJPTG to update the camera pointing and spacecraft-object vector in the corresponding SUMFILE.
autoregister is similar to register, but it can handle 3 degrees of freedom, orientation, and twist.
IMAGEFILES/ - a directory containing the image .DAT files;
SUMFILES/ - a directory containing the image .SUM files (updated solution image, S/C and camera information; lmrks and limbs);
MAPFILES/ - a directory containing the full suite of maplets;
LMKFILES / - a directory containing the full suite of landmarks;
LMRKLIST.TXT - a list of the landmarks contained in the solution;
LMRKLISTX.TXT - landmark information (size, scale, position vector, number of images containing the lmrk);
SUMFILES/ - Landmarks are added to the image's SUMFILE. Spacecraft/camera position/attitude are updated upon user acceptance of alignment shifts.
LMKFILES/ - LMKFILES is updated to contain the image the user is working with.
- LMRK_DISPLAY1.pgm - 100x100 pixel display of images (odd rows) and maplets (even rows). Unlike LITHOS, each pair is a separate landmark, consisting of a completely different location on the surface and image.
- TEMPFILE.pgm - A pgm image of the image that the user is working with.
When maplets are added in autoregister, they immediately populate the SUMFILE. The remaining processing must be carried out to eliminate unwanted ones. This is different from LITHOS where added images do not stay added until the landmark file is updated.
Alignment changes are immediately accepted (i.e. there is no save/revert option).
The following shows the initial inputs necessary to get to the Main Menu:
input 12-character picture name. q to quit. P3T11S2H0409 1 EE0001 * 2 EE0002 * 3 EE0003 * 4 EE0004 * 5 EE0005 * 6 EE0006 * gc TEMPFILE.pgm kb = 1 kk = 1 Add landmarks? (y/n) y enter fractional width (0=center) .5 Reject invisibles? (y/n) n 7 EE0007 0.00 8 EE0008 0.00 9 EE0009 0.00 10 EE0010 0.00 11 EE0011 0.00 12 EE0012 0.00 13 EE0013 0.00 14 EE0014 0.00 15 EE0015 0.00 16 EE0016 0.00
Enter the image name that is stored in IMAGEFILES.
Some versions of process_fits will make some changes to the filename, so it may not be the "original name". The program produces a list of existing landmarks, if any, creates the TEMPFILE.pgm and displays the kb, and kk values.
kb and kk are de-bugging flags relating to the generation of TEMPFILE.pgm and are not discussed here. Enter q as the image name to quit.
If you wish to add more landmarks, respond y. An initial filter for added images is set in INIT_LITHOS.TXT:
RESLM is the maximum ratio of the image resolution to the maplet scale;
SIZLM is the maximum ratio of the linear maplet size to the image size;
NUMLM sets the minimum number of maplets found in the image before the other two filters come into play.
Input the value for Fractional width. Normally this is 0.5. This value allows images that overlap any part of a window that is half the size of the maplet window.
If you enter 0.0, the image must contain the landmark center.
Typically, enter 'n' for Reject invisibles? unless the object is bizarre, such as Eros.
If you respond 'y', the program uses the current shape to determine whether there is topography blocking the camera's view of the landmark center.
When maplets are added in autoregister, they immediately populate the SUMFILE. The remaining processing must be carried out to eliminate unwanted ones. This is different from lithos] where added images do not stay added until the landmark file is updated.
After you respond to these initial inputs, the Main Menu will open.
autoregister Main Menu
... MAIN MENU ... 0. Exit REMOVE MAPLETS a. Auto remove n. Auto remove new only m. Manual remove p. Check peripheral visibility o. Remove low-correlation lmks IMAGE/MAPLET ALIGNMENT 1. Auto align 2. Manual align LANDMARK ADJUSTMENTS 3. Repredict px/ln 4. Change flags l. Change repredict limit
Enter 0 to exit the processing of the current image and choose a new one.
Enter q for the image name to quit the process altogether.
REMOVE MAPLETS Options
The first block of options remove landmarks according to a variety of filters. If you choose a, n, m or p, you will see a table with these column headers:
- # = landmark number
- LMKNM = landmark name
- EMISS = emission angle
- COV = maplet-image overlap
- RES = image resolution/maplet scale
- INV = 1000 x invisible fraction of maplet
- #PIC = number of images in maplet
Options a and n remove landmarks according to one of these filters:
- INVLIM - maximum fraction (in thousandths) of invisible points in the maplet according to the current topography. For example, an obliquely viewed maplet may have part of a crater bottom that can't be seen. An INVLIM of 27 represents 2.7%.
- SLIM - maximum emission angle.
- CLIM - coverage limit. Minimum fraction of maplet covered by illuminated image data.
- RSMN - Minimum allowed ratio of image resolution (km/px) to maplet scale.
- RSMX - Maximum allowed ratio of image resolution (km/px) to maplet scale.
Option a - Filters all landmarks. Option n filters only newly added ones. A display provided for the a and n options shows the number of images with resolutions from 0 to 3 times the maplet scale (column labels 00 - 30) and emission angles from 00 to 90 (rows).
Option m- Allows you to remove landmarks manually.
Option p - Removes images in the part of the maplet obscured by another part of the body.
Option o - Eliminates images whose correlation with the illuminated maplet is less than a specified value.
You must run Option 1. Auto align first to establish those correlation values.
IMAGE/MAPLET ALIGNMENT Options
This block of options aligns extracted imaging data with the corresponding illuminated maplets. The EXTRACT_DATA subroutines populate the landmark displays with image data projected onto the current maplet surface. We assume the maplet surfaces are correctly placed and oriented and have the correct topography. If the spacecraft position and camera pointing were correct at the image exposure time, then all maplets would align. If not all the maplets align, then the amount of misalignment can be used to correct the spacecraft state. This process performs the alignment, updating the pixel/line image-space landmark positions from their predicted values.
All windows in autoregister are 99x99 pixels. If a maplet has QSZ < 49, as sometimes happens very early in the SPC process, then there will be dark space surrounding it. If QSZ > 49, then only the central portion of the maplet will be aligned.
Option 1. Auto align - Requires you to respond to several prompts. Here is a sample:
1 1 EE0001 2 EE0002 3 EE0003 4 EE0004 5 EE0005 6 EE0006 7 EE0007 8 EE0008 9 EE0009 10 EE0010 11 EE0011 12 EE0012 13 EE0013 14 EE0014 15 EE0015 16 EE0016 enter spacing 1 1 EE0001 0.008 0.153 0.955 +++++ 2 EE0002 0.023 0.152 0.956 +++++ 3 EE0003 0.058 0.062 0.961 +++++ 4 EE0004 0.185 -0.056 0.960 +++++ 5 EE0005 0.006 0.029 0.967 +++++ 6 EE0006 0.002 0.009 0.966 +++++ 7 EE0007 0.043 -0.030 0.963 +++++ 8 EE0008 0.109 -0.038 0.963 +++++ 9 EE0009 -0.031 0.047 0.971 +++++ 10 EE0010 -0.021 0.014 0.969 +++++ 11 EE0011 -0.008 -0.048 0.958 +++++ 12 EE0012 0.069 -0.109 0.943 +++++ 13 EE0013 -0.352 -0.027 0.927 +++++ 14 EE0014 -0.175 -0.039 0.914 +++++ 15 EE0015 0.073 -0.058 0.913 +++++ 16 EE0016 0.371 -0.119 0.859 +++++ 0.147 0.076 new spacing? (y/n) n 0. continue. 1. halve shifts. 2. quarter shifts. 0 update landmark pixel locations? (y/n)
Enter Spacing - Enter the size of the search area for the correlation. Enter '1' to search a 5x5 pixel area, '2' for 10x10 and so on.
The Auto-alignment routine output table includes these columns:
- column 1 - landmark number
- column 2 - landmark name
- column 3 - the pixel shift predicted by the correlation
- column 4 - the line shift predicted by the correlation
- column 5 - the correlation value
- column 6 - the goodness of fit indicator that ranges from 0 to 5
new spacing? (y/n) - Enter 'y' and the new spacing.
You can repeat through several spacings until the correlation is satisfactory.
0. continue will shift all the maplets by the amount determined by the correlation.
1. halve shifts will shift all the maplets by half the amount determined by the correlation.
2. quarter shifts will shift all the maplets by a quarter the amount determined by the correlation..
update landmark pixel locations? - Enter 'y' if you want to accept the shift. If you enter 'n' the program returns the parameters to the starting values. For the larger search area, the data is binned. After alignment is reached, you should always go back and run it again with a spacing of 1.
Here is a typical set of keystrokes in a script for Option 1. Auto align:
1 <- auto align 3 <- spacing 3 n <- no spacing change 0 <- shift by full amount y <- keep shift 1 <- auto align 1 <- spacing 1 n <- no spacing change 0 <- shift by full amount y <- keep shift
Option 2. Manual align - This option can be used to align the problem image data to a maplet by hand by referencing LMRK_DISPLAY1.pgm. The process asks you to move the image window in pixels (+ right) and lines (+ down) in order to align it to the maplet.
Option 2 is only used occasionally.
LANDMARK ADJUSTMENTS Options
Enter one of these 3 options:
Option 3 - Use this option to repredict the image-space landmark locations for all maplets. Because the maplets have different resolutions, some may correlate well and some not at all. autoregister only uses correlations greater than CORLIM, nominally set to 0.5, to determine the s/c state. After you have used Option 3, subsequent correlations calculated using Option 1 will be much better.
Option l - Use this option to choose a different value for CORLIM.
Option 4 - Use this option to adjust the topo flags on the PICNM entry of each landmark (.LMK) file. When autoregister adds new landmarks, it does so with an * on the PICNM record, indicating that that image is not to be used for topography.
Here is a sample showing the output from Option 4.
4 1 EE0001 0.955 0 * 2 EE0002 0.956 0 * 3 EE0003 0.961 0 * 4 EE0004 0.960 0 * 5 EE0005 0.967 0 * 6 EE0006 0.966 0 * 7 EE0007 0.963 0 * 8 EE0008 0.963 0 * 9 EE0009 0.971 0 * 10 EE0010 0.969 0 * 11 EE0011 0.958 0 * 12 EE0012 0.943 0 * 13 EE0013 0.927 0 * 14 EE0014 0.914 0 * 15 EE0015 0.913 0 * 16 EE0016 0.859 0 * Input number to change (a chg all, b use all, 0 to end).
There are three sub-options to option 4, but the one usually used is 'b'. It removes the * from the PICNM record for all landmarks.
autoregister can be run in a batch mode, following a script set up by make_scriptA. This is rarely done. Usually, the parallel process autoregisterP and its script maker make_scriptAP fulfills this role.
Need to add something here to explain what these are and how they might be used???
(Compiled by DL)