Block 14 - Shift V2

Description

If the model has more than <criteria> of deviation from the center of figure, then shift it to be centered

Procedure

Set-up

Set the ID. This should be the current ID, not the new one (which will really just be moved)

ID=farV03
echo "Shifting the model, $ID = shapeVar" | tee -a notes

Record the current offset and make a new model that will be adjusted

cd SHAPEFILES
echo shape-$ID-512 | shape_info | tee -a ../notes
cp shape-$ID-512 shift-$ID.txt
cd ..

Run the shift command.

(Comment -- Unsure if the shape needs to be installed before geometry is run) Notice, the shape model cannot have the .TXT at the end with the shift program. FDS sends the offset with the sign flipped from what the shift program will use. FDS should have a note about this along with their delivery.

murphy
/usr/local/bin/shift
OffsetX OffsetY OffsetZ
y
shift-<whatever>
n
y

geometry
20
1
n
n

Install Shape

Install the shape and review the fit to our main images

cd SHAPEFILES
echo shift-$ID.txt | shape_info | tee -a ../notes
relink.sh shift-$ID.txt SHAPE.TXT | tee -a ../notes
cd ..
evalReg.sh lsupport/theEight

Finish the Block

```
echo 11 | blockFinish far\
```

Continue the process

While this completes the block, you still need to do the following procedures to make the shape model solid

(Compiled by EEP)