Block 14 - Shift V2

Description

If the model has more than <criteria> of deviation from the center of figure, then shift it to be centered

Record the current offset and make a new model that will be adjusted

   cd SHAPEFILES
   echo shape-far320v1-128 | shape_info | tee -a ../notes
   cp shape-far320v1-128 shift-far320v1.txt
   cd ..

Run the shift command.

(Comment -- Unsure if the shape needs to be installed before geometry is run)

   murphy
   shift
   OffsetX OffsetY OffsetZ
   y
   shift-far320v1
   n
   y

   geometry
   20
   1
   n
   n

   relink shift-far320v1.txt SHAPE.TXT
   evalReg.sh lsupport/theEight

While this completes the block, you still need to do the following procedures to make the shape model solid

  echo 11 | blockFinish far\

(Compiled by EEP)