Building a shape model

The normal way (Bob's way) is described in a text file called "densify.txt". I have created a script to automate things in a standard way.

• Copy the directory "shape3/support3" and put it in the working directory and call it support

   cd <workingDir>
   cp -r ../shape3/support3 support

• Edit the buildShape.sh file
  • Change the suffix to H2-Test1-
  • Comment out (#) the line that runs dummer

    • dumber < tmpRun.txt | tee -a shape.log # normally used

  • Remove the comment (#) from the line
    • #cp SHAPEFILES/SHAPE.TXT SHAPEFILES/dumb$suffix # used only with initial base model Q=32

This will create several different resolution shape models, each with a factor of 2 higher resolution. The 512 is the highest resolution model, with 1.6 million vectors.

One you create the high resolution model, you can install it in the directory SHAPEFILES. This is done by removing the symbolic link to SHAPE.TXT and replacing it with the new file that you've created.

•   ln -s shapeH2-Test1-512 SHAPE.TXT

You can run register and load the shape model to see how the new shape model looks.

Note, this shape model does not have albedo in it. If you want to have that, then you need to change the program from densify to densifyA.

• Run the program

   buildShape.sh

• When it is done, it will have already run view_shape (via another script viewShape.sh)
• Look at the files view_01.jpg (01 to 10) and shape.gif

Bigmap

• Create a bigmap using the TAG site definition.

   bigmap < MTAG15.in

• Display the map

   showmap
   MTAG15
   convert MTAG15.pgm mtag15.jpg
   open mtag15.jpg

coverage

You can use coverage_p to show how well a region has been tiled.

•  map_coverage
   MTAG15
   0 .0012
   convert coverage_m.pgm coverage.jpg

Building maplets using bigmap

Previously, we created maplets with the initial topography from the shape model. Once we go beyond 75cm (for Bennu), then the bigmap will have the higher resolution, which will be needed. To do this, we "fill" the maplet with the data from the bigmap rather than the shape model.

Running lithos

• c
• TEST06
• m
• MTAG15
• 200 200
• .00075 49
• i
• TEST06
• y
• .5
• n
• e
• n
• 0 50 .2 .2 0 4
• b - fill with map
• n - list possibilities
• MTAG15

Then just continue processing like normal. It is unlikely that you will need to align to a picture. You now have decent topography with albedo, so you should be able to just 'auto align' to get the images aligned -- that is option "1" and submenu "0" auto align