Block 14 - Shift V2

Description

If the model has more than <criteria> of deviation from the center of figure, then shift it to be centered

Procedure

Set-up

Set the ID. This should be the current ID, not the new one (which will really just be moved)

ID=farV03
echo "Shifting the model, $ID = shapeVar" | tee -a notes

Record the current offset and make a new model that will be adjusted

• cd SHAPEFILES
  echo shape-$ID-512 | shape_info | tee -a ../notes
  cp shape-$ID-512 shift-$ID.txt
  cd ..

Run the shift command.

(Comment -- Unsure if the shape needs to be installed before geometry is run) Notice, the shape model cannot have the .TXT at the end with the shift program.

• murphy
  /usr/local/bin/shift
  OffsetX OffsetY OffsetZ
  y
  shift-<whatever>
  n
  y
  
  geometry
  20
  1
  n
  n

Install Shape

Install the shape and review the fit to our main images

• cd SHAPEFILES
  echo shift-$ID.txt | shape_info | tee -a ../notes
  relink.sh shift-$ID.txt SHAPE.TXT | tee -a ../notes
  cd ..
  evalReg.sh lsupport/theEight

Finish the Block

• echo 11 | blockFinish far\

Continue the process

While this completes the block, you still need to do the following procedures to make the shape model solid

• Block 5 - Iterate v2

• Block 13 - BuildShape v2

(Compiled by EEP)