Differences between revisions 9 and 10
Revision 9 as of 2015-10-23 10:24:11
Size: 1450
Editor: JohnWeirich
Comment:
Revision 10 as of 2015-10-23 10:26:06
Size: 1349
Editor: JohnWeirich
Comment:
Deletions are marked like this. Additions are marked like this.
Line 9: Line 9:
||STEP||COMPAREOBJ(km)(w/ trans)|| CompareOBJ (km) w/o trans || compMapVec(m)||NOTES||
||step01 || 1.73|| ND || 0.32861328 || align by hand||
||step02 || 2.79 || 29.1 || 0.30130005||||
||step03 || 3.62 || 27.2 || 0.27734375||||
||step05 || 4.89 || 24.1 || 0.24008179||||
||step10 || 5.21 || 19.7 || 0.1
8780518||||
||step15 || 4.44 || 17.5 || 0.15457153
|| start autoalign at 16||
||step20 || 3.89 || 15.2|| 0.11227417||||
||step30 || 3.03 || 14.3 || 8.87756348E-02||||
||step40 || 2.21 || 13.9 || 7.58361816E-02||||
||step50 || 1.72 || 13.3 || 6.17370605E-02
||||
||step100 || 0.96 || 13.4 || 3.65600586E-02||||
||step150 || 1.33 || 12.8 || 3.23486328E-03
|| CompMapVec dropped 10x||
||step200 || 1.74 || 12.4 || 1.46179199E-02|| CompMapVec increased||
||STEP||COMPAREOBJ(cm)(w/ trans)|| CompareOBJ (cm) w/o trans || compMapVec(cm)||NOTES||
||step01 || 1.73|| ND || 32.9 || align by hand||
||step02 || 2.79 || 29.1 || 30.1||||
||step03 || 3.62 || 27.2 || 27.7||||
||step05 || 4.89 || 24.1 || 24.0||||
||step10 || 5.21 || 19.7 || 1
8.8||||
||step15 || 4.44 || 17.5 || 15.5
|| start autoalign at 16||
||step20 || 3.89 || 15.2|| 11.2||||
||step30 || 3.03 || 14.3 || 8.88||||
||step40 || 2.21 || 13.9 || 7.58||||
||step50 || 1.72 || 13.3 ||
6.17||||
||step100 || 0.96 || 13.4 || 3.66||||
||step150 || 1.33 || 12.
8  || 0.32 || CompMapVec dropped 10x||
||step200 || 1.74 || 12.4 || 1.46|| CompMapVec increased||

Test11N:

Building topography with Sun position at 30, 0, -30, S/C Az every 45, S/C zenith 45

Results Summary:

CompareOBJ with translate is probably meaningless. CompareOBJ without translate is better, but is still quite different from compMapVec (10cm vs 1cm). Once I started auto aligning the top of the boulder dropped down.

RMS Values:

STEP

COMPAREOBJ(cm)(w/ trans)

CompareOBJ (cm) w/o trans

compMapVec(cm)

NOTES

step01

1.73

ND

32.9

align by hand

step02

2.79

29.1

30.1

step03

3.62

27.2

27.7

step05

4.89

24.1

24.0

step10

5.21

19.7

18.8

step15

4.44

17.5

15.5

start autoalign at 16

step20

3.89

15.2

11.2

step30

3.03

14.3

8.88

step40

2.21

13.9

7.58

step50

1.72

13.3

6.17

step100

0.96

13.4

3.66

step150

1.33

12.8

0.32

CompMapVec dropped 10x

step200

1.74

12.4

1.46

CompMapVec increased

Traces:

out1_final.png

Landmark Display:

step01 display01.jpg step200 display200.jpg

Test11N (last edited 2015-10-27 09:33:27 by JohnWeirich)