Differences between revisions 7 and 8
⇤ ← Revision 7 as of 2023-03-04 23:49:22 →
Size: 11370
Editor: EricPalmer
Comment:
← Revision 8 as of 2023-03-04 23:52:04 → ⇥
Size: 11378
Editor: EricPalmer
Comment:
Deletions are marked like this. Additions are marked like this.
Line 350: Line 350:
This uses the fact that you recently made a bigmap as inputs for running a region-specific iteration. Remember, duplicates takes whatever list of landmarks in [[LIST.TXT]], sorts them, removes duplicates and replaced [[make_script.in]]. [[USED_MAPS]] is created by [[bigmap]], along with [[USED_PICTS]]. This contains all of the mapfiles that were used in building the bigmap. This uses the fact that you recently made a bigmap as inputs for running a region-specific iteration. Remember, duplicates takes whatever list of landmarks in [[LIST.TXT]], sorts them, removes duplicates and replaced [[make_script.in]]. [[USED_MAPS.TXT]] is created by [[bigmap]], along with [[USED_PICTS.TXT]]. This contains all of the mapfiles that were used in building the bigmap.

Training notes for JAXA session in support of MMX

Goals

  • Bring the students to the "SPC Training Level 2" TrainingLevels

    • Provide enough SPC hand-on skills that basic shape models can be built
    • Provides enough background so that additional practice and instruction can occur
    • It will be insufficient to fully train new personal to a level in which they could run an entire mission without support
  • Specific things to learn
    • Be able to create landmarks and add images
    • Basic trouble shooting and fixing mis-registration
    • Perform tiling (both globally and BIGMAP)
    • Do iterations
    • Run residuals, geometry
    • Register images to shape model or maps
    • Autoregister
  • Practice. A key component of this training is to practice. The practice allows for key concepts to become understood at a sufficient level to allow for more advanced concepts to make sense.

Student Prep

Because class time is limited, it is important to get the software and data installed before you show up to the conference. I will be available during the conference to help troubleshoot problems and help get your system functional before the class starts Wednesday morning. Once the class starts, I won't be able to ignore everyone else in the class to fix an install.

To maximize your learning in the class, I provide some information that will be beneficial to review.

Required Tasks To Complete Before Class Starts

  • Sign the Licensing Agreement. This must be on file before the software can be distributed. //Complete//

  • Download and install SPC software via GitHub

  • Download sample data. The data volume is large, so it is important to do it ahead of time. Some of the files need to be expanded and moved.

Extra software that is useful

  • Software - These are helpful tools. There are other tools you can use, but these are ones that we have found to be very useful.

    • gnuplot - Installing using MacPorts, "sudo port install gnuplot"

    • imagemagick Installing using MacPorts, "sudo port install ImageMagick"

  • SPC tools - (TBD) This is a suite of tools that make measuring pixel/line locations and offsets easier. This is not required and class time won't be used for installing this. Install instructions are coming soon
    • apache -- The is installed as default for most UNIX (and Mac) systems.
    • spc_tool javascript libraries
    • updateDisplay.sh - script to convert SPC output to a web-accessible format

    • How to install and run - SPC-GUI-tools

Day 1

Day 1 Practical - It's all about LITHOS

  • Topics
    • display landmark
    • landmark management
      • create
      • delete
      • rename
    • images
      • add images
      • remove images - auto and manual
      • select useable, correlation and manual
      • adjust image position, auto, manual
    • global shift
    • build template
    • find height
      • options

The core of SPC is lithos. That tool lets you create landmarks, associate images, align images, determine the 3D position of the landmark and create topography.

Fixing landmarks, using Input landmark

Aligning landmarks, using Align landmarks

Building a landmark Create new landmark and How To Build A Landmark

  • Name: DD0002
  • Lat/Lon: 20.072 / 290.164
  • Res: 0.0012
  • Q-size: 49

Template

Topography

Once all the images are aligned (the center pixel of every image is at the exact same feature of the surface), then you can build topography using photoclinometry with some conditions. Find heights

toposcript

State

A key diagnostic tool for SPC is understanding the state of the system. By state, I mean what are the conditions (the health or quality) of the landmark. There is no one parameter that tells you all of this, but it is looking at a wide set of details that tells you if there are problems.

See Notes from day 1

Day 2

New files for today

First - let's clean some of the landmarks

Blocks

We have provided some procedural blocks for different tasks. They include some additional log and configuration that will be different from you, but the main SPC steps are the same. Additionally, Bob has some "PROCEDURES" directory with his source code. There are instructions there and copy/paste commands.

SPC Blocks, V2

Let's talk about images

Block 2 - Ingest v2

Register

Block 3 - Register v2

  • Each images should be aligned with the shape model at a course level.

    • register

      • Practice
      • Batch

        • Clear out old TESTFILES and TESTFILES1

          • rm TESTFILES*/*

        • make_script.in

          • This must be created from the new list of images
          • Make a file of new image names and write them into make_script.in (with a proceeding space and the last line "END")
        • ln -s scripts/make_scriptR_01.seed make_scriptR.seed

        • make_scriptR

        • sh run_script.b
        • find_nofit

Support Files

While batch register is running, we will discuss some support files

Autoregister

Block 4 - Autoregister v2

  • Batch associate existing landmarks to new images

    • When you bring in new images, they have no landmarks. While you can add them into landmarks using lithos, that is not very productive. Thus, we use a program autoregister that loads all of the landmarks into the image you are working with.

    • autoregister

    • Batch

      • make_script.in -- This must be created from the new list of images

      • ln -s scripts/make_scriptA.seed make_scriptA.seed

      • make_scriptA

      • sh run_script.b

Iterate

Now that we've pulled in extra information, we need to iterate to get the information propagated to all the files

Block 5 - Iterate v2

Build a shape model

  • ICQ format
  • DENSIFY.TXT

  • densify

  • dumber

  • buildShape.sh - runs all of the commands as needed

Create a higher resolution

Block 6A - Lat/Lon Tiling v2

Day 3

  • Clean up from 75cm tiling
  • SPC Technical Info - Gaskell
    • Discussion of SPC Design
    • Technical details
    • Issues and complexities

Tiling by BIGMAP

Block 6B - Bigmap Tiling v2

  • Making a bigmap

    • Criteria for size, scale
      • Lat: -10
      • Lon: 350
      • Q size: 500
      • GSD: 25

    • Create support/RPI001.in

    Note - we use XXXXXX.MAP to allow for scripting. I use symbolic links to aid in keeping track of progress. By running showmap after building and linking the bigmap, you can prove that you have the correct map. 

  bigmap < support/BIG001.in
  cd MAPFILES
  ln -s RPI001.MAP XXXXXX.MAP
  cd ..
  echo XXXXXX | SHOWMAP
  convert XXXXXX.pgm lowMap.jpg

Checking for existing maplets

  map_coverage
  XXXXXX
  0 .0005
  convert coverage_m.pgm preCoverage.jpg

Building the make_scriptT.in file

  • Build the make_scriptT.in file

    • This includes some shell commands to make something you can copy/paste. Or you can use a text editor to build the make_scriptT.in, just make sure it follows the correct format for map-based referencing. 

  echo N | make_tilefile > tmp
  echo XXXXXX > support/bigmap_tile.in
  echo scripts/XXX035.seed >> support/bigmap_tile.in
  sed 1d tmp >> support/bigmap_tile.in
  ln -s support/bigmap_tile.in make_scriptT.in

Run Tiling

  • Run the tiling script. Once you make the INN files, you can track the progress *.OOT files. 

    make_scriptT
    sh run_script.b
    find_nofitT

Evaluation of the bigmap

Now that it is done, you can rebuild the bigmap and see the difference 

  bigmap < support/BIG001.in
  echo BIG001 | SHOWMAP
  convert BIG001.pgm highMap.jpg

map_coverage
BIG001
0 .0005
convert coverage_m.pgm postCoverage.jpg

System Evaluation

Iterate over region

This uses the fact that you recently made a bigmap as inputs for running a region-specific iteration. Remember, duplicates takes whatever list of landmarks in LIST.TXT, sorts them, removes duplicates and replaced make_script.in. USED_MAPS.TXT is created by bigmap, along with USED_PICTS.TXT. This contains all of the mapfiles that were used in building the bigmap. 

  make_lmrklistX
  rm TESTFILES*/*
  cp USED_MAPS.TXT LIST.TXT
  duplicates
  make_scriptP > run.sh
  sh run.sh
  find_nofitP

Questions

  • How are shape models used in navigation?

See

JAXA MMX Training Notes (last edited 2023-03-07 23:22:42 by EricPalmer)